M12 x 1.5 17mm Hex
Black Anodized finish.
Each nut weighs 18.5 grams
Set of 16 $112.00 Set of 20 $140.00
Made in Italy TUV certified
M12x1.5 22mm Hex
These stainless lug nuts will never rust or corrode.
Available in both right and left hand thread.
Set of 16 $120.00 Set of 20 $150.00
Made in England TUV certified
Acorn style left hand thread lug nuts for 105 series car that have not been converted. These lug nuts are LH 12mm x1.5 and are used when mounting Serpent wheels or other aftermarket wheels to cars with left hand threaded lug studs.
Set of Left & Right Lug Nuts $39.00 (8 lefts,8 rights)
Now available in 1/2" for Plymouth, Chrysler, Willy's, etc.
Set of Left & Right Lug Nuts $50.00 (10 lefts,10 rights)
Made in Italy TUV certified
Sizes available 12mm x 1.5, 12mm x 1.25 17 mm Hex
Set of 16 $32.00 Set of 20 $40.00
Extended Thread Lug Nut
Sizes available 12mm x 1.5, 12mm x 1.25M 19 mm Hex
Set of 16 $32.00 Set of 20 $40.00
Sizes available 12mm x 1.5, 12mm x 1.25
Set of 16 $16.00
Set of 20 $20.00
Closed Nut for PCD Variation Hex19 M12x1,5x34
Made in Italy TUV certified
Set of 16 $112.00 Set of 20 $140.00
Made in Italy TUV certified
With this new item you can use one wheel with unified center bore for several application. This bolt is fitted with a mobile conical washer which keeps the bolt axis perpendicular to the car flange while allowing radial displacement and a consequent PCD variation.
Set of 16 $64.00 Set of 20 $80.00
Lug Bolts for Alfa 164 and Fiat models For use on aftermarket wheels.
17 mm Hex - M12x1.25 cone seat 60 *
Available in thread lengths 28, 36, 50, 60mm
Set of 16 $34.00
Set of 20 $42.00 Made in Italy TUV certified
Ideal for under cap and wheel spacer application. Overall length 41 mm. Thread length 22mm. Made in Italy TUV certified
Set of 16 $48.00
Set of 20 $60.00
Right hand thread
Wheel Stud Style Press-in
Thread Size 12mm x 1.5 RH
Knurl Diameter 14mm
Knurl Length 12.5mm
Thread Length 52.5mm
Under head Length 65mm
Overall Length 70mm
Made in Italy TUV certified
Set of 4 $16.00
Set of 5 $20.00
Spline Wheel Studs
Right hand thread
Wheel Stud Style Press-in
Thread Size 12mm x 1.5 RH
Knurl Diameter 12mm
Knurl Length 12.5mm
Thread Length 52.5mm
Under head Length 65mm
Overall Length 70mm
Made in Italy TUV certified
Set of 4 $16.00
Set of 5 $20.00
Convert your Afa 164 or Fiat with these studs and use lug nuts in place of wheel bolts. For uses with aftermarket wheels.
1.25 x 1.25, 1.00" thread length
1.25 x 1.25, 1 1/4" thread length
1.25 x 1.25, 2 1/2" thread length
Set of 20 $40.00
Set of 16 $32.00
NEW 2 1/2" Length
Made in Italy TUV certified
External pattern design produces better torque. Bulge design provides greater seating surface than traditional Tuner lug nuts. Key socket is made from Chrome Vanadium Steel for maximum strength.
Sizes available 12mm x 1.5,
16 S/D Lug Nuts & Key Socket $44.00
20 S/D Lug Nuts & Key Socket $55.00
Save 20% when purchased with a set of Serpent Wheels.
External pattern design produces better torque. Bulge design provides greater seating surface than traditional Tuner lug nuts. Key socket is made from Chrome Vanadium Steel for maximum strength.
Sizes available 12mm x 1.5,
16 S/D ET Lug Nuts & Key Socket $44.00
20 S/D ET Lug Nuts & Key Socket $55.00
Save 20% when purchased with a set of Serpent Wheels.
Serpent Autosport Spacer/Adapters Custom Made (USA) to your exact hub and wheel centric requirements. Price per pair.
.750” (19.0mm) $145.00
1.00” (25.4mm) $150.00
1.25" (32mm) $160.00
1.50" (38mm) $170.00
1.75" (44.5mm) $180.00
2.00" (50.8mm) $190.00
2.50" (63.5mm) $210.00
3.00" (76.2mm) $230.00
GTAM Spacer/Adapters. 38mm thick for the front. 63.5mm for the rear.
Spiders with the Serpent Autosport fender
flares use the 25 mm spacers pictured. In the photo note the different center bore to fit hub centric, front
and back on Alfa Spiders and GTVs.
Serpent Autosport Custom Made Wheel Spacers
Our hub and wheel centric Spacers are custom made from 6061aluminum alloy that is both light in weight and extremely strong. These spacers are up to 70 percent lighter than steel spacers.
.250" (6.0mm) up to 1.00” (25.4mm) $120.00 per pair
Our hub and wheel centric Spacers are custom made from 6061aluminum alloy that is both light in
weight and extremely strong. These spacers are up to 70 percent lighter
than steel spacers
Hub and wheel centric 20mm Spacer for use only with extended thread lug nuts. Spacers can be made in any thickness 5mm up.
Longer vehicle hub studs and ET lug nuts may be required for proper wheel mounting.
Spacer/Adapters can be made to change lug pattern from standard Alfa 4x108 or 5x98 to match any wheel. Minimum thickness for adapters is 19mm. Spacer minimum thickness 5mm.
When ordering customer will provide the following information.
Spacer/Adapter thickness _____________mm
Vehicle bolt pattern__________ to Wheel Bolt Pattern_________
Vehicle Hub Diameter________ to Wheel Centerbore _________
Vehicle Lug Thread Size__________
For more information see this article by Alfa Racer Peter Webb, on the use of Spacer/Adapters.
Wheels must have pockets in the mounting surface for adapters 20-30 mm thick to work.
All sizes available, call with your size requirements.
Hub Centric Rings
High quality poly-carbon
Wheel center bore - vehicle hub diameter
67 o.d. - 57.1 i.d.
72 o.d. - 57.1 i.d.
73 o.d. - 57.1 i.d.
74 o.d. - 57.1 i.d.
67 o.d. - 58.1 i.d. Alfa 164/Fiat/ Lancia
72 o.d. - 58.1 i.d. Alfa 164/Fiat/Lancia
73 o.d. - 58.1 i.d. Alfa 164/Fiat/Lancia
74 o.d. - 58.6 i.d Alfa GTV6/Milano/Maserati Biturbo
67 o.d. - 58.6 i.d. Alfa GTV6/Milano/Maserati Biturbo
72 o.d. - 58.6 i.d. Alfa GTV6/Milano/Maserati Biturbo
73 o.d. - 58.6 i.d. Alfa GTV6/Milano/Maserati Biturbo
74 o.d. - 58.6 i.d Alfa GTV6/Milano/Maserati Biturbo
73 o.d. - 64 i.d.
Set of 4 $35.00
Custom sizes available. Call for details. (818) 848-3681
New!
Alfa Romeo Milano wheels badges
47 mm diameter badges fit factory wheels and are held in place
with factory circlip. Also fits GTA style wheels.
Set of 4 $49.00
